DIA V-tech
Finish Cut Panel Sizing Saw Blade
| Application | Sizing of panel material in single sheets and stacks in finish cut quality |
|---|---|
| Machines | Vertical panel saw with and without scoring saw blade, beams saws, table saws |
| Type | HC, HF, HK |
| Material | Core: Particleboard, MDF, HDF, Lamination: Paper, foil, melamine veneer |
| EdgeMaterial | DP |
Features & Benefits
• Cutting force is well in balance allowing a truer run out and better cut quality
• Because of the sharp cutting edge, good cut quality on the bottom of the board is obtained
Tooth type HC is suitable to cut melamine laminated board material.
Tooth type HF is suitable to cut paper or veneer laminated board material.
Tooth type HK is for use as a scoring saw blade on beam, panel and table saws.
Size
| Size | Type | Pin holes | ||||
|---|---|---|---|---|---|---|
| D | B | b | d | z | ||
| 303 | 3.2 | 2.2 | 30 | 50 | HC | 2/7/42+2/10/60 |
| 303 | 3.2 | 2.2 | 30 | 60 | HC | 2/7/42+2/10/60 |
| 303 | 3.2 | 2.2 | 30 | 72 | HC | 2/7/42+2/10/60 |
| 380 | 4.4 | 2.2 | 60 | 60 | HC | 2/14/100 |
| 450 | 4.8 | 3.5 | 60 | 72 | HC | 2/11/125 |
| 303 | 3.2 | 2.2 | 30 | 50 | HF | 2/7/42+2/10/60 |
| 303 | 3.2 | 2.2 | 30 | 60 | HF | 2/7/42+2/10/60 |
| 303 | 3.2 | 2.2 | 30 | 72 | HF | 2/7/42+2/10/60 |
| 380 | 4.4 | 2.2 | 60 | 60 | HF | 2/14/100 |
| 450 | 4.8 | 3.5 | 60 | 72 | HF | 2/14/100 |
| Size | Type | Pin holes | |||||
|---|---|---|---|---|---|---|---|
| D | B | B1 | b | d | z | ||
| 100 | 3.2 | 4.2 | 2.2 | 22 | 10 | HK | |
| 120 | 3.2 | 4.2 | 2.2 | 22 | 10 | HK | |
| 125 | 4.4 | 5.4 | 3.2 | 20 | 10 | HK | |
| 125 | 4.8 | 5.8 | 3.5 | 45 | 10 | HK | |
| 160 | 4.4 | 5.4 | 3.2 | 45 | 20 | HK | |
| 180 | 4.8 | 5.8 | 3.5 | 20 | 24 | HK | |
| 180 | 4.4 | 5.4 | 3.2 | 30 | 24 | HK | |
| 200 | 4.8 | 5.8 | 3.5 | 45 | 24 | HK | |
| 215 | 4.4 | 5.8 | 3.2 | 50 | 24 | HK | |